designed & dimensioned in millimeters[inches] -hn: heavy gold/nickel (see notes 7 & 8) (sub-bnc7-j-c-n-st-bh3) (bnc-skt-003-h) (bnc-fer-002-n) (btnc-fer-002-n) -mn: medium gold/nickel (see notes 7 & 8) (sub-bnc7-j-c-n-st-bh3) (bnc-skt-003-m) (bnc-fer-002-n) (btnc-fer-002-n) gender -j: jack type -c: cable plating specification termination -bh3: bulkhead 3 (rg179 cable) orientation -st: straight bnc7-j-c-xx-st-bh3 nut btnc-nut-001-n lock washer btnc-lwas-001-n socket bnc7-skt-003-x insulator bnc7-ins-001 inner ferrule btnc-fer-002-n outer ferrule bnc-fer-002-n sub assembly sub-bnc7-j-c-n-st-bh gasket btnc-gkt-001 13.00 .512 12.10 .476 recommended mounting hole recommended cable stripping 4.20 .165 9.20 .362 17.70 .697 c sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: bnc7 str, jack rg179 - 75 ohm by: bnc7-j-c-xx-st-bh3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing g herman 06/25/2008 3 1 sheet scale: 2:1 revision d f:\dwg\sw\exisprod\assembly\rf\bnc\bnc7-j-c-xx-st-bh3\bnc7-j-c-xx-st-bh3.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 notes: 1. represents a critical dimension. 2. center contact pushout force: 26.69 n [6 lb] min. 3. see sheet 3 for termination information. 4. components to be shipped unassembled. 5. sample orders: to be packaged in individual kit form, production orders: each component to be bulk packaged. 6. rohs compliant. 7. component plating designations: -h: 0.00076[0.000030] (min) gold over 0.00127[0.000050] (min) nickel. -m: 0.00025[0.000010] (min) gold over 0.00127[0.000050] (min) nickel. -n: 0.00254[0.000100] (min) nickel. 8. assembly plating designations: -hn: (center contact)-h: (outer contact)-n: (remaining metal parts)-n: -mh: (center contact)-m: (outer contact)-n: (remaining metal parts)-n:
16.00 .630 ref 1.40 ref .055 12.50 ref .492 16.00 .630 ref 12.80 ref .504 0.50 ref .020 16.00 .630 hex ref 2.50 ref .098 13.00 .512 1.63 .064 2.25 ref .089 2.05 ref .081 2.05 .081 0.85 .033 29.80 1.173 3.71 .146 11.38 .448 flat ref 17.50 .689 hex ref 0.60 ref .024 2.10 ref .083 13.94 ref .549 5.30 .209 ref 12.50 ref .492 3.00 ref .118 sheet of bnc7 str, jack rg179 - 75 ohm by: bnc7-j-c-xx-st-bh3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing g herman 06/25/2008 3 2 sheet scale: 3.5:1 revision d 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 f:\dwg\sw\exisprod\assembly\rf\bnc\bnc7-j-c-xx-st-bh3\bnc7-j-c-xx-st-bh3.slddrw
4.20 .165 9.20 .362 17.70 .697 rg179 cable 20.00 2.50 .787 .098 heat shrink tube bnc-fer-002-x-n 3.70 .146 (min. flared id) insulator bnc7-ins-001 inner ferrule btnc-fer-002-x 0.10 max. .004 socket bnc7-skt-003-x sub assembly (sub-bnc7-j-c-n-st-bh3)(shown) 12.75 max. .502 4.52 hex crimp .178 c1 c2 20.00 (ref) .787 lock washer (btnc-lwas-001-n) nut (btnc-nut-001-n) btnc-gkt-001 5.25 - 0.17 + 0.03 .207 - .007 + .001 detail 'a' scale 2.5 : 1 c3 apply heat shrink tube crimp ferrule (use rf crimp hand tool #cat-ht-126667-21 or equivalent) add sub-bnc7-p-c-x-st-ca3 solder signal socket flare shield, add inner ferrule and insulator add heat shrink tube and ferrule strip and tin inner conductor sheet of bnc7 str, jack rg179 - 75 ohm by: bnc7-j-c-xx-st-bh3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing g herman 06/25/2008 3 3 sheet scale: 1.25:1 revision d f:\dwg\sw\exisprod\assembly\rf\bnc\bnc7-j-c-xx-st-bh3\bnc7-j-c-xx-st-bh3.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
